IBS Structural Plywood
Features
-
-
- Manufactured from PEFC Certified forests in Chile by Arauco
- LFE Panel Low Formaldehyde Emissions
- Ultrasound Tested on the production line
- AS/NZS 2269 Structurally certified to F8
- High quality face veneer
- WBP Marine Bonded Phenolic Glue
-
IBS Structural Ply is fully inline certified to New Zealand standards by SAI Global.
IBS Structural Ply has been manufactured by Arauco and tested to meet all requirements of Plywood Structural Standard AS/NZS 2269 in products that are stamped and labeled accordingly.
It is a certified A bond using an Exterior Phenol-Formaldehyde resin and is an (LFE) Panel or Low Formaldehyde Emissions.
A CD Grade is primarily used where the end use is visual. A clean solid face that may have solid knots and splits with a minor filling. Finished with a 150 grit three-step sanding process and 100 grit on the back veneer.
Structural Plywood cladding must always be installed vertically in an exterior situation.
IBS Structural Ply — More than Just a Pretty Face
Available Sizes
| Untreated | Treated H3.2 |
| 2400 x 1200 x 7 mm | 2400 x 1200 x 12 mm |
| 2400 x 1200 x 9 mm | 2400 x 1200 x 15 mm |
| 2400 x 1200 x 12 mm | 2400 x 1200 x 18 mm |
| 2400 x 1200 x 15 mm | 2400 x 1200 x 21 mm |
| 2400 x 1200 x 18 mm | 2400 x 1200 x 25 mm |
| 2400 x 1200 x 21 mm | |
| 2400 x 1200 x 25 mm |
