IBS RigidRAP® XT

The Next-generation Rigid Air Barrier System 

 

Key Features; 

  • Tri-Layer System (Laminated with a BRANZ appraised watertight wall underlay as well as a graphite polystyrene thermal break) 
  • Provides peace of mind no matter the weather conditions outside 
  • Cost-effective 
  • Multiple specified tape options  
  • Swift handling and installation 
  • Superior product properties 
  • Environment-Friendly 
  • IBS Green Tick Approved 
Categories: , ,
  • Description

    • IBS RigidRAP®-XT is the only Tri-layer Rigid Air Barrier system available in New Zealand with a Thermal Break Laminated on the back of each board. 

    IBS RigidRAP®-XT is an 8mm OSB3 product that has been laminated with an approved building paper to give your house dual protection from the weather during your building process as well as a Thermal break graphite Polystyrene board on the inside making it ideal for Steel Frame Buildings.  

    IBS RigidRAP®-XT is not only a temporary weather cladding but it also provides bracing. The product is lightweight, easy to cut nail or screw, and can be exposed to the weather for up to 90 days. 

    Make your house warmer – quieter & stronger with IBS RigidRAP®-XT  

    IBS RigidRAP®-XT replaces the traditional building paper wrap to above all support a healthier, stronger home. 

    Laminated with a BRANZ appraised watertight wall underlay, IBS RigidRAP®-XT is the next generation of Rigid Air Barriers.  

    What makes OSB so strong is due to it being made of three layers, the top and bottom 25% layers are laid running the length of the sheet middle 50% is laid running the width of the sheet.  This creates a strong structural panel that is resistant to delamination and warping. 

     

    Certifications – 

    • CodeMark Certified (CM70091) 
    • CE certified under EN 13986 and produced in accordance with EN 300 
    • Continuous third party testing through an independent notified body in the EU 
    • Hard-wearing exposure tested by SCION New Zealand (90 days exposure) 
    • Meets all requirements of the New Zealand Building Code (NZBC) 
  • Sizes
    • Available Sheet Sizes –

    2440 x 1196 x 18mm
    2745 x 1196 x 18mm
    3050 x 1196 x 18mm

  • Tape Options
    • Below are some of the option available for use  RigidRAP –

    Thermaflash Flashing Tape Letter 
    Thermaflash Flashing Tape BRANZ  

    Hydro Tape 75mm (Masons)
    Masons 40 Below (Masons)
    Super-Stick (Marshalls Innovations)
    Watertight (Techno Insulations)
    FlameFlash (Techno Insulations)
    3M™ All Weather Flashing Tape 8067 (3M™)
    DriStud Cool Tape (DriStud)
    TESCON EXTORIA (Pro Clima)
    EUROBAND S 60 (Frame Protection)

  • Order A Sample

      • Case Studies

      Related products