FIBRE® Flex Pre-Primed

View IBS CAD Drawings

What are the recommended safety precautions when installing IBS FIBRE® Flex Pre-Primed sheets?
Ensure to work in a well-ventilated area, use dust masks and eye protection when cutting or sanding the sheets. Follow all safety guidelines provided in the technical literature.

How should IBS FIBRE® Flex Pre-Primedsheets be stored prior to installation?
Store the sheets flat and off the ground in a dry, covered area to prevent warping and damage.

What tools and materials are required for the installation of IBS FIBRE® Flex Pre-Primed sheets?
You will need standard carpentry tools, including a high-speed cutting tool, drill, screws or nails, tape measure, level, and appropriate personal protective equipment.

Can IBS FIBRE® Flex Pre-Primed sheets be painted, and if so, what type of paint should be used?
Yes, IBS FIBRE® Flex Pre-Primed sheets can be painted. Use a high-quality, exterior-grade acrylic paint suitable for cement-based materials.

What are the guidelines for cutting and drilling IBS FIBRE® Flex Pre-Primed sheets to ensure durability?
Use a carbide-tipped blade for cutting and pre-drill holes for fasteners to prevent cracking. Follow the manufacturer’s guidelines for specific cutting and drilling instructions.

How do you ensure proper alignment and spacing when installing IBS FIBRE® Flex Pre-Primed sheets
Use a chalk line or laser level to mark guidelines on the substrate. Maintain the recommended gap between sheets for expansion and contraction, as specified in the installation guide.

What are the best practices for sealing and waterproofing IBS FIBRE® Flex Pre-Primed sheets in outdoor installations?
Apply a waterproof membrane or sealant as recommended in the technical literature, especially in areas exposed to moisture. Ensure that tops of balustrades and parapets have a minimum 5° slope and are waterproofed according to the guidelines .

Are there any specific environmental conditions to consider when installing IBS FIBRE® Flex Pre-Primed sheets?
Consider the local climate, such as humidity and temperature, and follow the manufacturer’s guidelines for installation in various environmental conditions.

How do you handle and dispose of waste materials during the installation of IBS FIBRE® Flex Pre-Primed sheets?
Collect offcuts and dust in a designated area and dispose of them according to local regulations. Avoid creating dust and dispose of waste responsibly.

What maintenance is required after the installation of IBS FIBRE® Flex Pre-Primed sheets to ensure longevity?
Regularly inspect the sheets for any signs of damage or wear. Clean the surface with mild soap and water, and touch up paint as needed to maintain the protective coating.

IBS FIBRE® Flex Pre-Primed is designed to be highly flexible, making it easy to work with and suitable for curved surfaces and intricate designs.

Fibre cement is manufactured through a meticulous process that involves several key steps to ensure the material’s strength, durability, and versatility.

The primary raw materials used in the production of fibre cement include high-grade cellulose pulp fibre, finely ground sand, Portland cement, and water.

Initially, bales of cellulose pulp are dissolved in water and milled to the desired fineness.

This slurry is then combined with synthetic fibres and other additives in large vats, where hydrogen bridges form during the chemical process, binding the ingredients together.

The mixture is then transferred to an intensive mixer, where cement is added, and the setting process begins.